JIVE 200 E – Underground Electric Gates Automation

JIVE 200 E – Underground Electric Gates Automation

Electric Gates

Product Advantages

  • Easy-to-handle emergency release from inside & outside (for power failure)
  • Adjustable, non-contact end switch
  • No end stop position in Gate OPEN necessary
  • Invisible in the ground – ideal for designer gates
  • Automatic force reading/power programming
  • Stainless steel housing
  • Operator unit completely waterproof
  • 24 V technology

Technical Details

  • Wing lengths up to 2000 mm
  • Wing heights up to 2500 mm
  • Wing weights up to 200 kg
  • Wing filling width max. 50 %

Electric gates Installation Info

All automation systems need to be installed by a qualified engineer. We can normally supply someone to survey, install and automate. If not we can normally locate someone close to you to install for you. An additional ‘boot’ must be engineered to support at least 2/3 of the gate leaf. This is so that the operation does not damage the automation or the gates. If unsure please ask for more info. Please info you engineer of these terms of use as Wooden Gate Timber Products Ltd will not be held responsible for any damage or premature fatigue of Gates or automation.

Download Instructions

We can provide support during installation and maintenance to assist and help everything run as smooth as possible.

** Please note. We recommend all automation is installed by a qualified engineer. We can normally provide this service or locate someone near to you. When installing great care must be taken not to put excess stain on gate(s) or motor(s). Wooden Gate Timber Products Ltd will NOT take any responsibility for any damage found to be caused by incorrect installation.

RUNNER Sliding Gate Automation System

RUNNER Sliding Gate Automation System

Automatic Gates

Product Advantages

  • Suitable for sliding gates up to 6 m travel distance and 600 kg gate weight
  • No active safety contact strip on the main closing edge necessary
  • Maintenance-free, energy-saving operator with long service life
  • Fully automatic force read-in, thus providing the highest safety
  • 24 V technology with controlled soft running
  • Defined direction of movement activation (open/close) or adjustable partial opening
  • Energy-saving ring transformer
  • Non-contact end switch (reed contacts)
  • Integrated evaluation for safety strips
  • Service-friendly, overhead controller
  • Frequency-modulated secure radio frequency
  • BACK UP BATTERY PACK AVAILABLE !

Properties

Emergency release from outside:
With SOMMER sliding gate drives, the gate can be locked and unlocked easily in every position. This provides you with the highest security, e.g. in the event of a power failure.

Compact plastic housing:

  • UV-resistant and resistant to aging
  • Robust, tough and non-rusting
  • In timeless, descreet anthracite black

STA-1 motor controller:

  • Pluggable
  • Integrated in the housing
  • Connection for TorMinal
  • Integrated radio receiver (FM 868.8 MHz)

Electronic end switch:

  • Precise, non-contact end switching
  • Easy-to-adjust
  • No mechanical wear

Rack:

  • Plastic-sheathed steel rack
  • Ensures quiet and smooth gate running
  • Standard sizes 4 m (expandable to max. 6 m)

Scope of supply

Complete set “RUNNER” 

  • incl. 1x sliding gate operator
  • STA-1 motor controller
  • 4 m plastic rack
  • Radio receiver (FM 868.8 MHz)
  • Universal mounting base plate
  • 2 x  4-command handheld transmitter (Art. no. 4020V000)
  • 1 x light barrier for safety

 

Full instructions available RUNner Installation Instructions 46779V001-322013-0-OCE-Rev._EN (1)

** Please note. We recommend all automation is installed by a qualified engineer. We can normally provide this service or locate someone near to you. When installing great care must be taken not to put excess stain on gate(s) or motor(s). Wooden Gate Timber Products Ltd will NOT take any responsibility for any damage found to be caused by incorrect installation.

TWIST 350 Swing Gate Automation Kit

TWIST 350 Swing Gate Automation Kit

Product Info

Flexible
  • universally suitable for gates opening to the left and right
  • also for gates which open to the outside
  • adjustable brackets (can be screwed or welded as required)**
  • microprocessor control board with a range of setting options, such as pedestrian door function, automatic closing  of gate, adjustable early warning time, adjustable functions when obstacle is encountered while door is closing (either total or partial gate reversal)
  • interface for TorMinal programming device
  • quick installation and easy electrical connection**

 

Secure
  • self-locking without any electrical lock (up to 3.5m)
  • automatic power deactivation ensures more security
  • operator can be engaged and disengaged in any position (e.g. in case of power failure)
  • connections for safety facilities such as warning light and 2-/4-wire light barrier (photo cell), as well as for an external consumer (DC 24 V), floating relay output
  • motor and gears are protected by the patented SOMMER braking system from overload (up to 2 tons), e.g. wind  loads or vandalism

 

Elegant
  • modern design
  • regulated soft run, without power loss

  • extremely quiet, smooth movement

Technical Info

  • max weight per leaf 300 kg
  • max torque 2500 N
  • Lendth of Arm 450mm
  • Power rating AC 220…240 V
  • Works in temperatures between -30°C and +70°C
Includes
  • 2 x Automation Arms
  • 2 x 4-command remotes
  • 1 x light barrier
  • 1  control box
  • Brackets needed.

 

We can provide support during installation and maintenance to manufacturers specifications.

** Please note. We recommend all automation is installed by a qualified engineer. We can normally provide this service or locate someone near to you. When installing great care must be taken not to put excess stain on gate(s) or motor(s). Wooden Gate Timber Products Ltd will NOT take any responsibility for any damage found to be caused by incorrect installation.

TWIST 200E for single leafs

Twist 200E Gate Automation for Single Leaf Wooden Gate

The powerful Single swing gate operator

Product advantages

  • Weldable or screw type fittings available
  • Easy-to-handle, lockable emergency release (e.g. for power failure)
  • High-quality, non-rusting material such as stainless steel and aluminium
  • Stainless steel ice-stripping ring
  • No end stop positions in “Gate open” necessary
  • Easily adjustable, non-contact end switch (reed contacts)
  • Very precise end shutoff by means of fine adjustment
  • No mechanical wear and tear and even longer durability
  • Very easy to adjust
  • Automatic force read-in
  • Soft start-up and soft stopping is gentle on the gate mechanism
  • Very quiet
  • Connections for: Warning light, photo eyes, external consumers (DC 24 V)
  • Easy installation
  • Universal usability for left or right stop
  • Electromechanical
  • Gate wing width max. 2500 mm
  • Weight per gate wing max. 200 kg
  • Suitable for inclined gates (with special fitting)
  • 112 radio memory positions
  • Low-energy consumption
  • 24 V technology – no electric shocks at the gate
  • Self-learning closing sequence for 2-wing gates
  • Cycle counter
  • Low-energy consumption thanks to ring core transformer
TWIST 200E for single leafs

Technical Details

  • Gate filling max. 50% closed, independently from the width and height of the gate
  • Self-locking, high-performance worm gear
  • The housing is made of UV-resistant and non-ageing special plastic.
  • Power supply AC 230 V, 50/60 Hz / motor voltage DC 24 V
  • Opening time approx.. 13 – 26 seconds, opening angle max. 129° (depending on the mounting point)
  • Automatic closing function – adjustable via DIP switch
  • Walk-through function
  • Polished stainless steel spindle
  • Simple connection through 2-wire technology

 

** Please note. We recommend all automation is installed by a qualified engineer. We can normally provide this service or locate someone near to you. When installing great care must be taken not to put excess stain on gate(s) or motor(s). Wooden Gate Timber Products Ltd will NOT take any responsibility for any damage found to be caused by incorrect installation.