RUNNER Sliding Gate Automation System
Automatic Gates
Product Advantages
- Suitable for sliding gates up to 6 m travel distance and 600 kg gate weight
- No active safety contact strip on the main closing edge necessary
- Maintenance-free, energy-saving operator with long service life
- Fully automatic force read-in, thus providing the highest safety
- 24 V technology with controlled soft running
- Defined direction of movement activation (open/close) or adjustable partial opening
- Energy-saving ring transformer
- Non-contact end switch (reed contacts)
- Integrated evaluation for safety strips
- Service-friendly, overhead controller
- Frequency-modulated secure radio frequency
- BACK UP BATTERY PACK AVAILABLE !
Properties
Emergency release from outside:
With SOMMER sliding gate drives, the gate can be locked and unlocked easily in every position. This provides you with the highest security, e.g. in the event of a power failure.
Compact plastic housing:
- UV-resistant and resistant to aging
- Robust, tough and non-rusting
- In timeless, descreet anthracite black
STA-1 motor controller:
- Pluggable
- Integrated in the housing
- Connection for TorMinal
- Integrated radio receiver (FM 868.8 MHz)
Electronic end switch:
- Precise, non-contact end switching
- Easy-to-adjust
- No mechanical wear
Rack:
- Plastic-sheathed steel rack
- Ensures quiet and smooth gate running
- Standard sizes 4 m (expandable to max. 6 m)
Scope of supply
Complete set “RUNNER”
- incl. 1x sliding gate operator
- STA-1 motor controller
- 4 m plastic rack
- Radio receiver (FM 868.8 MHz)
- Universal mounting base plate
- 2 x 4-command handheld transmitter (Art. no. 4020V000)
- 1 x light barrier for safety
Full instructions available RUNner Installation Instructions 46779V001-322013-0-OCE-Rev._EN (1)
** Please note. We recommend all automation is installed by a qualified engineer. We can normally provide this service or locate someone near to you. When installing great care must be taken not to put excess stain on gate(s) or motor(s). Wooden Gate Timber Products Ltd will NOT take any responsibility for any damage found to be caused by incorrect installation.