Skip to content

Softwood Gates – Redwood

Softwood  is often referred to as  Redwood or Pine.  It is classed as a moderately hard wearing timber suitable for outside use great for Softwood gates,  but its not red !


Redwood weight is 510kg per m3


All softwood gates will need looking after at least twice per year for the whole of its life so will need close attention during its first year.The more treatment in the first year the better however Redwood makes an excellent softwood gate, you will just have to look after it to get the keep it looking fresh and to get the best lifespan.


Softwood Gates take a stain or paint well but does need attention during its life. This timber left outside if only for 1 day and allowed to get very wet, could result in the timbers turning black,the boards expanding in their frame to such an extent that they can buckle off the main frame. At Wooden Gate Timber Products we offer staining service prior to the gate being delivered or fitted to reduce the risk of this.


The effect of water damage in Redwood can be greatly reduced by the application of the stabilizing solution which stops moisture entering the timber too fast, or loosing it when the weather turns very hot. This coating will last for up to 6 months, where the gate will need to be protected with a good few coats of oil, or a similar coating. DO NOT USE MICRO POROUS FINISHES .


If you would prefer to have a much more durable set of wooden softwood gates or hardwood gates, then perhaps you should think of investing in a  Western red Cedar or hardwood gates ie. IDIGBO , Iroko or even European Oak!!  We now even offer Aluminium Gates in a wood effect finishes!!

Softwood Gates

Types of Wooden Gate



Click one of our contacts below to chat on WhatsApp

× WhatsApp