Twist 200E Gate Automation for Single Leaf Wooden Gate

The powerful Single swing gate operator

Product advantages

  • Weldable or screw type fittings available
  • Easy-to-handle, lockable emergency release (e.g. for power failure)
  • High-quality, non-rusting material such as stainless steel and aluminium
  • Stainless steel ice-stripping ring
  • No end stop positions in “Gate open” necessary
  • Easily adjustable, non-contact end switch (reed contacts)
  • Very precise end shutoff by means of fine adjustment
  • No mechanical wear and tear and even longer durability
  • Very easy to adjust
  • Automatic force read-in
  • Soft start-up and soft stopping is gentle on the gate mechanism
  • Very quiet
  • Connections for: Warning light, photo eyes, external consumers (DC 24 V)
  • Easy installation
  • Universal usability for left or right stop
  • Electromechanical
  • Gate wing width max. 2500 mm
  • Weight per gate wing max. 200 kg
  • Suitable for inclined gates (with special fitting)
  • 112 radio memory positions
  • Low-energy consumption
  • 24 V technology – no electric shocks at the gate
  • Self-learning closing sequence for 2-wing gates
  • Cycle counter
  • Low-energy consumption thanks to ring core transformer
TWIST 200E for single leafs

Technical Details

  • Gate filling max. 50% closed, independently from the width and height of the gate
  • Self-locking, high-performance worm gear
  • The housing is made of UV-resistant and non-ageing special plastic.
  • Power supply AC 230 V, 50/60 Hz / motor voltage DC 24 V
  • Opening time approx.. 13 – 26 seconds, opening angle max. 129° (depending on the mounting point)
  • Automatic closing function – adjustable via DIP switch
  • Walk-through function
  • Polished stainless steel spindle
  • Simple connection through 2-wire technology

 

** Please note. We recommend all automation is installed by a qualified engineer. We can normally provide this service or locate someone near to you. When installing great care must be taken not to put excess stain on gate(s) or motor(s). Wooden Gate Timber Products Ltd will NOT take any responsibility for any damage found to be caused by incorrect installation.